Microtek 2KVA/48V MAX LiFe Online UPS

Microtek 2KVA/48V MAX LiFe Online UPS – Advanced Lithium-Ion Compatible Power Backup

The Microtek 2KVA/48V MAX LiFe Online UPS is a high-performance uninterruptible power supply designed to protect professional computers, workstations, networking equipment and critical electronic systems from unexpected electricity interruptions. Featuring true double-conversion technology, a 0.9 output power factor, an intelligent 20A inbuilt charger and lithium-ion battery compatibility, this UPS provides dependable power protection for modern business environments.

With a rated capacity of 2000VA/1800W, a 48V DC external battery system and pure sine wave output, the Microtek MAX LiFe Series combines advanced power conversion with flexible battery backup configurations.

Manufactured by Microtek, this Online UPS is suitable for offices, IT installations, computer laboratories and compatible professional electronic equipment.

True Double Conversion Online UPS Technology

The Microtek 2KVA/48V MAX LiFe Online UPS uses true double-conversion technology to deliver stable and regulated power.

Unlike traditional line-interactive UPS systems, a double-conversion Online UPS continuously powers connected equipment through its inverter during normal operation.

Incoming AC electricity is converted into DC power and then converted back into regulated AC electricity.

This process helps isolate connected equipment from many electrical disturbances, including voltage fluctuations and sudden power interruptions.

The UPS provides zero transfer time from normal double-conversion operation to battery mode, helping compatible devices remain operational when the incoming electricity supply fails.

This is particularly useful for computer systems, network equipment and other electronic devices where unexpected shutdowns may interrupt important tasks.

2KVA/1800W Power Capacity with 0.9 Output Power Factor

The Microtek MAX LiFe 2KVA Online UPS offers a rated output capacity of 2000VA and 1800 watts.

Its 0.9 output power factor provides sufficient active power capacity for a range of appropriately sized professional electronic loads.

Compared with a 2KVA/1600W UPS, this model offers a higher rated wattage capacity.

Potential applications include desktop computers, workstations, networking switches, routers, compatible small servers and office IT systems.

Before installation, the connected equipment’s total operating power should be calculated to ensure that it remains within the UPS rating.

Suitable power headroom is recommended for reliability, particularly where connected equipment may have changing power requirements.

Lithium-Ion Battery Compatibility

One of the most important features of the Microtek 2KVA/48V MAX LiFe Online UPS is its compatibility with approved lithium-ion battery systems.

The UPS uses a 48V DC external battery arrangement, allowing a suitable battery pack to supply energy during mains power failures.

Lithium-ion battery technology can provide advantages such as relatively compact energy storage and long service life when correctly designed, charged and maintained.

However, lithium-ion batteries are available in different chemistries, nominal voltages and charging configurations.

A battery labelled 48V should not automatically be considered compatible with this UPS.

The battery pack’s operating voltage range, charging voltage, maximum charging current and Battery Management System (BMS) requirements must be checked against the UPS.

The MAX LiFe product family is designed for lithium-ion applications, but individual battery compatibility requires confirmation.

Powerful 20A Inbuilt Battery Charger

The Microtek MAX LiFe 2KVA UPS includes a 20 Amp inbuilt battery charger, helping support appropriate external battery charging arrangements.

The manufacturer specifies adjustable charging current settings of 2A, 4A, 8A, 10A, 12A, 14A, 16A and 20A.

These settings can be configured using the supported LCD interface.

The charging system is designed to provide controlled charging current with low ripple characteristics for compatible battery applications.

Charging current should always be selected according to the battery manufacturer’s specifications.

The maximum 20A setting is not necessarily suitable for every battery pack.

Correct charger configuration helps protect the battery system and maintain dependable backup availability.

Advanced Battery Management Technology

The Microtek 2KVA/48V MAX LiFe Online UPS incorporates Advanced Battery Management (ABM) features.

These functions support battery-related monitoring and charging management.

When using lithium-ion batteries, the battery’s own BMS also plays an important role in protecting cells from operating outside approved temperature, current and voltage limits.

The UPS charger and battery BMS must be compatible with each other.

Before installation, customers should verify whether the selected battery requires any specific communication interface or operating profile.

Professional system configuration is recommended for reliable operation.

Pure Sine Wave Output for Sensitive Equipment

The Microtek MAX LiFe 2KVA Online UPS delivers pure sine wave output during battery operation.

Pure sine wave power is suitable for a wide range of compatible electronic power supplies and professional IT devices.

The UPS supports selectable output voltages of 200V, 208V, 220V, 230V and 240V AC.

Microtek specifies battery-mode output voltage regulation of ±1%.

It also lists harmonic distortion limits of 2% or less for linear loads and 4% or less for non-linear loads.

These characteristics support stable AC output for compatible computing and electronic equipment.

When configured for 200V or 208V operation, the manufacturer specifies that the output capacity should be reduced to 80% of its standard rating.

Wide Input Voltage and Frequency Range

The Microtek 2KVA/48V MAX LiFe Online UPS supports a wide AC input voltage range.

According to the manufacturer, its operating voltage range extends from approximately 110V to 280V AC at 50% load and 176V to 280V AC at full load.

The input frequency range is specified as 40Hz to 70Hz.

This helps the UPS operate under supported electrical conditions where the incoming electricity supply varies.

The actual supported operating range depends on load and configuration.

These capabilities can be useful for locations where consistent mains power quality cannot always be guaranteed.

LCD Display for Convenient UPS Monitoring

The Microtek MAX LiFe Online UPS features an LCD panel that displays important operating information.

Users can monitor connected load levels, battery levels, AC mode, battery mode, bypass mode and fault conditions.

This information helps operators understand the current UPS status and identify alerts.

The LCD interface also provides access to supported battery charging settings.

Its convenient monitoring features make the UPS suitable for professional users responsible for maintaining computing and networking systems.

ECO Mode for Higher Energy Efficiency

The Microtek 2KVA MAX LiFe Online UPS incorporates an ECO operating mode intended to reduce energy losses when the input power is suitable.

The manufacturer specifies at least 96% ECO mode efficiency and at least 90% AC mode efficiency for the 2KVA model under its documented test conditions.

ECO mode can improve energy efficiency, but it uses a different power delivery arrangement from normal continuous double-conversion operation.

For applications requiring the highest level of continuous input isolation, the appropriate operating mode should be selected according to equipment requirements.

Emergency Power Off and Electrical Protection

The Microtek 2KVA/48V MAX LiFe Online UPS includes an Emergency Power Off (EPO) function for supported installation arrangements.

It also incorporates overload and short-circuit protection features designed to respond to electrical faults.

Microprocessor-based control supports UPS monitoring and reliable power conversion.

The system’s electrical protection features are intended to operate within the manufacturer’s specified conditions.

Proper grounding, protective devices, electrical connections and battery installation remain essential for safe operation.

Generator Compatibility for Business Installations

The Microtek MAX LiFe Series is generator compatible, subject to suitable generator output conditions.

This allows the UPS to be considered for sites where a generator provides an additional electricity source during extended mains failures.

The UPS’s external battery pack can provide temporary power during an interruption, while a correctly sized generator may support longer operating requirements.

Generator capacity and output power quality should be evaluated against the UPS specifications before installation.

Suitable for IT Infrastructure and Professional Applications

The Microtek MAX LiFe 2KVA Online UPS is suitable for various properly sized professional applications.

Potential uses include desktop computers, workstation systems, network switches, routers, computer laboratories, office networking equipment and compatible electronic systems.

Its 1800W rated output and flexible lithium-ion battery compatibility make it relevant for modern office power backup installations.

Businesses selecting the UPS should consider the connected load, battery energy capacity, charging specifications and backup runtime.

Organizations planning larger IT projects can explore the range of computers, networking equipment and power backup solutions offered through Aadinath Peripherals.

Compact Design with External Battery Flexibility

The Microtek MAX LiFe 2KVA UPS uses a compact cabinet measuring approximately 530 × 145 × 220 mm.

The manufacturer specifies a net UPS weight of approximately 8.6kg, excluding the external battery system.

Because the batteries are installed separately, the required battery energy capacity can be planned according to approved configurations.

The UPS should be installed in a clean, adequately ventilated environment.

External lithium-ion battery packs should be securely mounted and connected with suitable cables and protective devices.

Buy Microtek 2KVA/48V MAX LiFe Online UPS from Aadinath Peripherals

At Aadinath Peripherals & Consumables, we supply IT hardware, power backup systems, computing equipment, networking products and accessories for businesses and institutions.

Our team can assist customers with UPS product enquiries, quotations, compatible battery procurement and bulk purchasing requirements.

You can also review the official Microtek MAX LiFe technical brochure for additional manufacturer specifications.

Whether you require a single UPS for office equipment or multiple systems for a professional IT installation, selecting the correct capacity and battery configuration is essential.

For current prices, availability and bulk order enquiries, visit Aadinath Peripherals or email sales@aadinathperipherals.com.

Choose the Microtek 2KVA/48V MAX LiFe Online UPS (899-460-2001) for 1800W output capacity, true double-conversion technology, lithium-ion battery compatibility, intelligent 20A charging, pure sine wave output and advanced electrical power protection.

Technical Specifications